|
| |
Ozone Monitor Application Sheet
| Using the DL-2
ozone data logger with the
OMC-1108
allows you to monitor and record you ozone concentrations over a period of time.
This can be used in laboratory settings to determine environmental
conditions over time. |
 |
 |
The
OMC-1108 can be used as personal safety device to
warn of ozone concentrations over the OSHA limit of 0.1 PPM average for and
eight hour day. The
OMC-1108 has an
audible alarm that can be set at any point that is desired with in the 0.01 to
9.99 concentration range. |
| Using the DL-2 data logger with the
OMC-1108 allows
you to monitor and record you ozone concentrations over a period of time. This
can be used in laboratory or working areas to chart fluctuating ozone levels. |
 |
 |
Using the
OMC-1108 as a leak
detector for ozone generation equipment can alert technicians of possible
leaks. The OMC-1108 can help make system troubleshooting easier by making leak
detection quick and easy. |
Features:
| The
OMC-1108 Membrane
sensor head allows for quick response time for leak detections. This membrane
sensor is also less susceptible to VOC interruption than the other HMOS sensors
(low sensor shown). High range
ozone sensor also available. |
 |
 |
The leather protective case that comes with all
OMC-1108s
ensures the unit can withstand the daily bumps & bangs. Leather case comes with
a high strength belt clip on the back for securing to a users waist. |
Ask about our remote head option!
 |
The OMC-1108-RH (Remote Head) can be used to monitor ozone concentrations as high
a 149.9 PPM from a safe location up to 20-ft away. This unit can monitor ozone
concentrations in a controlled environment such as a manufacturing process or a
laboratory. |
 Printable
PDF Document (436K)
 Back
to OMC-1108 Ozone Monitor
Contact Us
for more information
|
